DH Fence Pros

What Impacts Fence Costs in Seattle

Daniel — Mon, 22 Dec 2025 12:44:38 +0000

What Impacts Fence Costs in Seattle

Why fence prices in Seattle are not one-size-fits-all

If you’ve been researching fence installation in Seattle, you’ve probably noticed that prices can vary quite a bit from one quote to another. That’s normal, and it usually comes down to a few key factors rather than random pricing.

This page breaks down the main things that impact fence costs in Seattle so you can better understand estimates, compare options, and plan your project with confidence.

Fence material plays a major role in pricing

One of the biggest factors affecting fence cost is the type of material you choose. Different materials vary in price, durability, and installation requirements.

Cedar fencing is popular in Seattle for its appearance and performance in wet conditions. Hogwire fencing offers a more open, modern look and typically uses cedar framing. Driveway gates involve additional materials, hardware, and sometimes electrical work.

Each material comes with different cost considerations, which is why pricing can vary significantly between projects.

Fence height and total footage

Fence pricing is usually calculated per linear foot, so the total length of the fence directly affects overall cost. Smaller fencing projects, such as those under 40 linear feet, often carry a higher cost per foot due to minimum labor and material requirements, while larger projects of 100 linear feet or more may benefit from a lower cost per foot as those fixed costs are spread across a longer fence. Taller fences also require more materials and deeper posts, which increases both material and labor expenses.

Fence height rules and placement guidelines in Seattle can influence design decisions, which in turn affect pricing.

Property layout and site conditions

Seattle properties often include slopes, uneven ground, landscaping features, or limited access areas. These conditions can increase installation time and complexity.

Additional preparation, adjustments during installation, or specialized techniques may be required, all of which can affect overall cost.

Permits and local regulations in Seattle

In Seattle, most residential fences do not require a permit.

Fences under 6 feet in height typically do not require permits, while fences over 6 feet may require one depending on placement and local building rules. Because of this, many standard residential fence projects, including most hog wire fence installations, proceed without permits.

When permits are required, DH Fence Pros handles the permitting process and ensures the project complies with Seattle building codes. This helps homeowners avoid delays, paperwork, and compliance issues during installation.

Installation complexity and labor

Not all fence installations are the same. Custom designs, tight access areas, and properties with existing structures can increase labor time.

Driveway gates often involve additional steps such as post reinforcement, precise alignment, and electrical work for automated systems, which can affect overall pricing.

Timing and seasonal demand

Timing and seasonal demand can also influence fence costs in the Seattle area. While many homeowners associate fencing projects with spring and summer, demand is typically highest during the warmer months. This can lead to longer scheduling timelines and, in some cases, higher pricing due to increased labor demand.

At DH Fence Pros, we build fences year-round, including during Seattle’s wetter and winter months. Cooler seasons often offer more scheduling flexibility and can be a good time to complete a project without competing with peak summer demand. Planning ahead, especially for spring or summer installations, can help ensure smoother coordination and fewer delays.

Comparing fence costs across Seattle neighborhoods

Fence costs across the Seattle area are generally consistent, but site conditions can vary slightly depending on the city or neighborhood. Whether a project is in Seattle proper, the Eastside, or surrounding communities, factors such as yard layout, slope, and site access can influence how a fence is installed.

We regularly provide fence installation throughout Greater Seattle, including neighborhoods like West Seattle, Queen Anne, Ballard, Mercer Island, Bellevue, and nearby cities. While working in denser or urban areas may involve additional parking or access coordination, these are logistics we plan for and do not typically affect pricing.

In cases where a project requires significantly longer travel times or special access, such as ferry-served locations, any additional considerations are discussed upfront so homeowners have clear expectations before moving forward.

How this information helps you plan better

Understanding what impacts fence costs allows you to:

Ask better questions during estimates
Compare quotes more accurately
Choose materials that fit your budget and goals
Avoid surprises during installation

Being informed helps you stay in control of the decision-making process.

Ready to Transform Your Seattle Property?

Transform your Seattle property with custom fence installation backed by 25+ years of expertise and 70+ 5-star reviews. Contact DH Fence Pros today for a professional estimate and expert service you can trust.

Why do fence quotes vary so much in Seattle?

Pressure Washing Cedar Fence Seattle: Safe Do’s and Don’ts

Daniel — Fri, 28 Nov 2025 06:29:05 +0000

Pressure Washing Cedar Fence Seattle: Safe Do’s and Don’ts

Pressure washing is one of the fastest ways to clean a cedar fence, but it must be done carefully. Cedar is a soft wood, and too much pressure can cause splintering, gouging, or long-term damage. This guide explains how to pressure wash a cedar fence safely in Seattle, the right PSI to use, and common mistakes to avoid.

Seattle’s wet climate also creates ideal conditions for moss and mildew, so proper cleaning is essential for keeping cedar fences in good condition.

Should You Pressure Wash a Cedar Fence in Seattle

Yes. It is safe to pressure wash cedar as long as you use low pressure and gentle cleaning techniques. Seattle’s constant rain and shaded yards often cause:

Moss growth
Mildew buildup
Dirt and pollen sticking to the wood
Discoloration on north-facing sides

Pressure washing helps remove this buildup and prepares the fence for sealing or staining.

Safe PSI Levels for Cedar Fencing

Cedar is much softer than pressure treated lumber. This means high pressure can cut into the wood.

Use these guidelines:

Recommended PSI: 500 to 1,200 PSI
Always start on the lower end
Use a wide fan tip, not a pinpoint tip
Keep the nozzle about 12 to 18 inches away from the wood

If your cedar is old or dry, stay on the very low end of PSI.

Best Cleaning Solutions for Seattle Weather

Seattle homeowners often need to remove mildew or algae. Safe cleaners include:

Mild wood detergent
Oxygenated wood cleaners
Cedar safe soap
Mildew cleaner for shaded areas

Avoid using bleach. It can weaken cedar fibers and change the natural wood tone.

Step by Step Guide to Pressure Washing a Cedar Fence

Follow these simple steps to clean your cedar fence safely:

Step 1: Rinse the Fence

Remove loose dirt and soften the surface.

Step 2: Apply Cleaner

Use a pump sprayer or brush to coat the surface evenly.

Step 3: Gently Pressure Wash

Use steady, sweeping motions. Do not stay in one spot too long.

Step 4: Rinse Thoroughly

Remove all cleaner residue to prevent streaking.

Step 5: Let the Wood Dry

In Seattle, cedar usually needs 24 to 48 hours of dry weather before staining or sealing.

Drying time may take longer during spring and fall.

Common Mistakes Seattle Homeowners Should Avoid

Avoid these issues to protect your cedar:

Using high pressure
Holding the nozzle too close
Washing damaged or soft wood
Using harsh chemicals
Washing during rainy or very cold weather
Washing and staining on the same day

Seattle’s climate makes timing important. Always check the forecast before cleaning your fence.

When Pressure Washing Is Not Recommended

Avoid pressure washing if the fence shows:

Soft or spongy boards
Deep cracks
Rot
Loose or leaning posts
Heavy moss that requires brushing first

In these situations, cleaning by hand or repairing the fence is safer.

Preparing for Staining After Pressure Washing

If you plan to stain the fence after cleaning:

Allow the wood to dry fully
Choose a stain made for the Pacific Northwest
Apply when temperatures are above 50 degrees
Avoid rain for 24 to 48 hours

You can read more in our Fence Staining Seattle Guide.

Ready to Transform Your Seattle Property?

What PSI is safe for pressure washing a cedar fence?

Cedar Fence Maintenance Seattle: Annual Cleaning & Care Guide

Daniel — Thu, 27 Nov 2025 14:30:07 +0000

Cedar Fence Maintenance Seattle: Annual Cleaning & Care Guide

Cedar fences are one of the best choices for Seattle homes because they naturally resist rot, moisture, and pests better than other wood types. However, Seattle’s long rainy seasons and heavy moisture can still affect cedar if it is not maintained.

This guide explains how Seattle homeowners can maintain their cedar fence year round, how often to clean it, and what signs to watch for to prevent early damage.

Why Cedar Fence Maintenance Matters in Seattle

Seattle weather exposes cedar to frequent rain, shade, and moisture. Without regular care, this can lead to:

Moss growth
Black mildew spots
Faster graying
Moisture absorption
Soft or weakened boards
Warping and cracking

If you want to understand how cedar performs in Seattle before maintenance, visit our Cedar Fence Seattle Benefits and Cost Guide.

Seattle Yearly Cedar Fence Maintenance Checklist

Do these once a year to keep your fence strong and protected:

Rinse the fence to remove dirt and pollen
Remove moss early before it spreads
Trim or clear plants touching the fence
Make sure soil or mulch is not pressed against boards
Tighten loose screws or gate hardware
Check for areas that absorb water instead of beading
Look for leaning posts or soft wood

How to Clean a Cedar Fence Properly

Seattle homeowners often deal with moss and mildew. Cleaning helps remove buildup before it spreads deeper into the wood.

Step 1: Rinse or Low Pressure Wash

Use low PSI
Keep the nozzle a safe distance away
Choose a fan tip for even cleaning

Step 2: Use a Cedar Safe Cleaner

Good options for Seattle weather include:

Mild wood detergents
Oxygenated cleaners
Mold and mildew cleaners for shaded areas
Avoid harsh chemicals or bleach

Step 3: Let the Fence Dry

In Seattle weather, cedar usually needs 24 to 48 hours of dry conditions. Drying time depends on rain, temperature, and sun exposure.

How Often to Reseal or Restain a Cedar Fence

Cedar fences in Seattle should be sealed or stained every 2 to 3 years. The exact timing depends on:

Shade exposure
Frequency of rain
Soil or vegetation touching the fence
Type of stain used previously

Signs the fence needs resealing

Water no longer beads on the surface
Wood looks dull or faded
Moss begins forming
Gray patches appear

Signs the fence needs resealing

Water no longer beads on the surface
Wood looks dull or faded
Moss begins forming
Gray patches appear

For stain recommendations, visit our Fence Staining Seattle Guide.

Common Cedar Fence Issues in Seattle

Seattle and nearby Pacific Northwest cities face similar cedar fence problems:

Moss in shaded areas
Soft or spongy boards from moisture
Soil holding water against the wood
Leaning posts after storms
Graying from UV and rain together

Most of these issues are preventable with yearly maintenance.

When to Call a Professional

Contact a professional if:

Boards feel soft
Rot is visible
The fence is leaning
Mold returns quickly
You are unsure when to reseal

We can inspect your fence and recommend the best maintenance or repairs.

You may also visit our Contact Page to request assistance.

Ready to Transform Your Seattle Property?

How often should you maintain a cedar fence in Seattle?

Fence Staining Seattle: How to Protect Your Cedar Fence From Rain

Daniel — Mon, 24 Nov 2025 13:40:42 +0000

Cedar fences are a favorite choice for Seattle homes because they look natural and handle Pacific Northwest weather better than most wood types. However, Seattle’s heavy rainfall and long wet seasons can still damage cedar if it is not properly stained.

This guide explains how to stain your cedar fence, how often to do it, and what products work best in Seattle’s climate. If your cedar fence needs repairs before staining, our team at DH Fence Pros can help restore it.

Why Cedar Fence Staining is Important in Seattle

Seattle weather can cause cedar to absorb moisture quickly. This leads to moss growth, discoloration, and early aging. If you want to know how cedar performs in our climate before staining, read our Cedar Fence Seattle Benefits and Cost Guide for more details.

Staining helps prevent:

Wood rot
Moisture absorption
Moss and mold growth
UV fading during summer
Warping and cracking
Premature aging

Additionally, stain makes the fence look cleaner and more uniform, which is helpful for homes near trees, bushes, or constant shade.

How Often Should You Stain a Cedar Fence in Seattle

Seattle homeowners should plan to stain their cedar fence every 2 to 3 years. The exact timing depends on:

How much shade the fence gets
Whether it touches soil or plants
Amount of rainfall and moisture
The stain product used

New cedar fences should be stained 4 to 8 weeks after installation once the wood is fully dry.

Best Stain Types for Seattle Weather

Because Seattle sees moisture nearly year round, the stain you choose matters. Here are the best types for long lasting results:

Oil Based Stains
Offer deeper penetration and better moisture resistance.
Semi Transparent Stains
Protect well while showing some natural wood grain.
UV Blocking Stains
Protect against sun exposure during dry months.
Mildew Resistant Formulas
Designed for shaded or moss prone areas.

Oil based and semi transparent stains work best in Seattle because they protect cedar from constant rain. However, if you prefer a material that does not need staining, our Aluminum Fence Seattle Guide explains why many homeowners choose low maintenance metals for wet climates.

How to Prepare a Cedar Fence for Staining

Proper preparation is the key to a long lasting finish. Follow this simple process:

Step 1: Clean the fence
Remove dirt, mildew, and moss. A light pressure wash is helpful but keeps the pressure low.

Step 2: Let the wood dry
The fence must be completely dry before applying stain. In Seattle, drying usually takes 24 to 48 hours.

Step 3: Sand rough spots
Light sanding helps stain absorb evenly and prevents blotching.

Step 4: Cover nearby surfaces
Use painter’s tape and plastic to protect plants, grass, or concrete.

Best Time to Stain a Fence in Seattle

The best staining season in Seattle is:

Late spring
Summer
Early fall

Additionally, check the forecast to ensure 24 to 48 hours of dry weather. Avoid staining when temperatures drop below 50 degrees or rain is expected.

If you are unsure when your fence is ready, our team can provide guidance based on local weather trends and wood condition.

DIY or Hire a Professional

You can stain your cedar fence yourself, but Seattle’s climate makes the job more technical. Hiring a professional ensures:

Correct pressure washing
Proper drying time
Repairs before staining
Commercial grade stains
Smooth and even application

You can stain your cedar fence yourself, but hiring a trained contractor ensures proper cleaning, drying, and application. If you want to understand the advantages of hiring a licensed company, visit our blog on Benefits of Hiring Licensed Fence Contractors in Seattle.

How to Maintain a Stained Cedar Fence

Even after staining, simple upkeep helps protect your fence:

Rinse off dirt or pollen once a year
Trim plants touching the fence
Remove moss early
Check for fading or water absorption
Re stain when water stops beading on the surface

Additionally, fences with heavy tree coverage or constant shade may need more frequent touch ups.

How long does stain last on a cedar fence in Seattle?

Driveway Gate Installation Seattle: Automatic vs Manual Guide

Daniel — Thu, 20 Nov 2025 15:32:05 +0000

What Is a Driveway Gate

A driveway gate is a barrier installed at the entrance of your driveway. It controls who can enter your property and adds protection, privacy, and style. Driveway gates can be simple manual swing gates or fully automatic systems with remotes, keypads, and even smartphone access.

Common features include:

Swing operation that opens inward or outward
Manual or automatic systems
Custom wood or metal designs
Optional security add-ons like intercoms and cameras
Weather resistant construction suitable for Seattle’s rain and moisture

Unlike regular fencing, driveway gates offer both beauty and real security. This makes them popular for homeowners who want convenience, privacy, and improved curb appeal.

Why Driveway Gates Are Popular in Seattle

Seattle homeowners in areas like Mercer Island, Magnolia, West Seattle, and Queen Anne often choose driveway gates for safety and design.

Security and Access Control

A driveway gate helps prevent unwanted vehicle access and makes your property clearly private. Automatic options can also include cameras, intercoms, and remote entry for added convenience.

Boosts Curb Appeal and Property Value

A driveway gate creates an immediate visual upgrade and often appeals to Seattle buyers. Many homes with custom gates see a value increase of about 5 to 10 percent.

Performs Well in Seattle Weather

Seattle gets frequent rain, so driveway gates are built from moisture-resistant materials like pressure-treated wood, galvanized steel, and aluminum. With proper care, they can last twenty to thirty years or longer.

Automatic vs Manual Driveway Gates

Manual Driveway Gates

A manual gate is opened by hand. These gates are simple, reliable, and the most affordable option.

Advantages:

Lower initial cost
No electrical components to maintain
Works during power outages
Simple and straightforward

Disadvantages:

Requires getting out of the vehicle, which is inconvenient in heavy rain
Fewer security features
Not ideal for frequent use

Automatic Driveway Gates

Automatic gates open with a remote control, keypad, sensor, or smartphone app. Many homeowners prefer them for convenience and safety.

Advantages:

Easy and convenient to open
Supports intercoms, cameras, and access logs
Looks more modern and professional
Offers strong security

Disadvantages:

Higher installation cost
Requires electrical work
Needs occasional maintenance
May need a battery backup for power outages

Driveway Gate Cost in Seattle

Manual Gate Cost

Manual driveway gates are usually more affordable. Prices vary based on materials and size.

Typical Seattle pricing:

Wood frame double swing gate (maximum 12′ width): $2000-5000
Metal frame double swing gate (8-16′ width): starting price $8,000

Cost factors:

Height and width
Wood or metal material
Custom details
Terrain slope
Hardware quality

Automatic Gate Cost

Automatic driveway gates cost more because of motors, wiring, and accessories.

Typical pricing:

Sliding gate with motor: starting price $15,000
Double swing gate with two motors: Starting price $20,000

Cost depends on:

Motor type
Electrical installation
Access control features (including keypads, remote controls, motion sensors)
Gate size and material
Optional backup power

For a detailed quote based on your driveway and design, visit our Contact page.

Driveway Gate Maintenance Costs

Manual gates need basic yearly care such as hinge lubrication or sealing for wood frames. This simple maintenance usually costs around $100 per year for most Seattle homes.

Automatic gates require more upkeep because of the motor, wiring, and sensors. Annual inspections and minor adjustments typically range from $200 to $500, depending on your gate and Seattle’s weather conditions.

For an exact maintenance estimate based on your driveway and design, DH Fence Pros can provide a detailed breakdown.

Driveway Gate Installation Process

Timeline: 2 to 7 days depending on the project

Wood manual gates usually take about 2 days to install. Anything that is metal framed gates take longer because they require custom measurements, welding, and powder coating. This fabrication process typically takes two to four weeks. Once the metal frame is ready, installation can be completed in as little as 2 to 3 days.

Step 1: Consultation and Assessment

We visit your home to look at your driveway width, slope, soil, and layout. We talk about your design goals and walk you through manual and automatic options.

Step 2: Design and Permitting

We finalize your design and materials, pull permits if required, and order any custom components. DH Fence Pros handles all permitting to ensure compliance with Seattle building codes. Most residential driveway gates under 6 feet do not require permits, but we always verify requirements for your specific property.

Step 3: Electrical Installation

Automatic gates need power. A licensed electrician installs conduit, wiring, and ensures everything meets Seattle electrical code.

Step 4: Posts and Gate Hanging

We set posts in concrete and allow the concrete time to cure. Once the posts are ready, we install the gate and align everything correctly. For automatic gates, we also install the motor, sensors, and keypad.

Step 5: Testing and Setup

We fully test the gate. This includes safety sensors, remote controls, keypads, and smartphone access. We also show you how to operate and maintain your new gate.

Step 6: Cleanup and Final Review

We walk you through the final installation and clean up the work area.

Maintenance Tips for Seattle Weather

Spring

Rinse the gate to remove dirt
Check hinges for rust
Test automatic operation

Summer

Lubricate moving parts
Check sensors
Touch up paint or stain if needed

Fall

Remove leaves or debris
Check alignment
Inspect for water build up

Winter

Watch for ice at the gate base
Ensure sensors stay clear
Test manual override

Preventing Rust and Rot

Metal gates: rinse once or twice per year, check for rust, touch up paint

Aluminum gates: clean with mild soap

Wood gates: seal every three to five years

Automatic gates: check sensors monthly and look for debris

Driveway Gate Design Options

Swing Gates

Swing gates open inward or outward. In most cases, they work best on driveways that are flat or have a gentle slope and swing inwards.

Material Choices

Wood: natural look but requires periodic sealing
Metal: welded steel or aluminum with powder coated finish for rust resistance

Height and Style

Most residential gate heights range from four to six feet.

Styles include:

Modern clean lines
Ornamental patterns
Rustic wood
Fully custom welded designs

If you are comparing different materials, you can also explore our Cedar Fence, Aluminum Fence, and Hog Wire Fence services.

Ready for Your Custom Driveway Gate

A driveway gate adds security, beauty, and convenience to your Seattle home. Whether you prefer manual or automatic, DH Fence Pros can build a gate that fits your home and your lifestyle.

We have installed custom driveway gates in West Seattle, Magnolia, Queen Anne, Mercer Island, Ballard, Capitol Hill, Greenlake, Bellevue, and other nearby communities.

If you want to compare materials or explore other options, you can also view our cedar fence, aluminum fence, and hogwire fence services.

Contact DH Fence Pros today for a consultation and detailed estimate.

Frequently Asked Questions About Driveway Gate in Seattle

Do you offer financing

Hogwire Fence Seattle: Modern Design, Cost & Installation Guide

Daniel — Wed, 12 Nov 2025 06:39:36 +0000

What Is a Hogwire Fence?

A hogwire fence uses welded wire mesh panels framed with wood or metal posts. The open grid design maintains views while defining boundaries, making it ideal for modern homes and gardens.

Key features include:

Open grid design maintains views while defining boundaries
Welded wire panels (typically 4″x4″ or 2″x4″ spacing)
Custom frames in cedar, steel, or aluminum
Versatile heights from 3-5ft
Low maintenance with galvanized or powder-coated wire

The welded wire mesh is stronger and more durable than chain link fencing. Additionally, the custom framing options allow you to personalize your fence to match your home’s aesthetic, whether you’re looking for a modern minimalist design or an industrial-style statement.

Why Hogwire Fences Are Popular in Seattle

Seattle homeowners, especially in neighborhoods like Capitol Hill, Ballard, West Seattle, and Queen Anne, are choosing hogwire for its modern aesthetic and practical benefits.

Perfect for Seattle’s Modern Architecture

Hogwire complements contemporary and mid-century modern homes beautifully. The clean lines and open design match Seattle’s architectural trends without overwhelming smaller yards. However, if you have a traditional or historic home, hogwire may not be the best fit. Cedar fencing or aluminum fencing might be better options to consider.

Preserves Views Without Sacrificing Boundaries

Seattle’s natural beauty, including mountains, water, and gardens, deserves to be seen. Hogwire fencing maintains sightlines to landscaping and views while keeping pets contained and defining property lines. The open design creates a sense of openness in smaller yards, making your outdoor space feel larger and more connected to your surroundings.

Handles Seattle’s Wet Climate

Galvanized wire resists rust even in Seattle’s 37 inches of annual rainfall and 70% humidity. When paired with pressure-treated cedar or powder-coated steel frames, hogwire fences last 15-25 years or more with minimal maintenance. Additionally, the open mesh design allows water to drain through rather than pooling against the fence, which reduces rot and extends the lifespan of your frame.

Hogwire Fence Pros and Cons

Advantages

Modern, sleek aesthetic that complements contemporary homes
Unobstructed views and sightlines to your landscape
Pet-friendly with secure containment without blocking visibility
Durable welded wire and quality frames last decades
Low maintenance because galvanized wire resists rust and corrosion
Versatile for gardens, yards, slopes, and terraces
Allows light and air flow through the fence
Highly customizable (post materials, heights, wire color)

Disadvantages

Limited privacy due to open grid design
Higher cost than chain link due to custom fabrication
Modern style doesn’t suit traditional homes
Lower-quality wire can corrode without proper galvanization
Installation requires precise tensioning and framing expertise

However, many Seattle homeowners find that the modern aesthetic and view preservation outweigh the higher upfront cost. The minimal maintenance requirements also make hogwire a cost-effective choice over the fence’s 20+ year lifespan.

Hogwire Fence Cost in Seattle

Installation Pricing

Typical hogwire fence costs range from $60 to $120 per linear foot, with a minimum project cost of $5,000. These prices reflect the custom fabrication and quality materials used in every installation.

Example projects include:

50-foot garden fence (4ft tall): $3,000 to $6,000
100-foot backyard fence (5ft tall): $7,000 to $12,000
150-foot perimeter fence (4ft tall): $9,000 to $15,000

Cost factors affecting your price include:

Fence height (3ft vs. 5ft)
Post material (cedar, pressure treated, steel, aluminum)
Wire color (galvanized silver vs. powder coated black)
Gate type (single vs. double, manual vs. automatic)
Terrain (flat vs. sloped yards)
Existing fence removal

Custom design elements like decorative post caps or specialty wire colors may increase the total cost, but these upgrades add significant visual appeal to your property.

Maintenance Costs

Hogwire fencing is incredibly affordable to maintain. Annual maintenance runs $50 to $150 and includes rinsing wire panels 1-2 times yearly, inspecting the frame for damage, and lubricating gate hardware. Cedar frames need sealing every 3-5 years.

Over 20 years, your total cost stays between $6,000 to $20,000 depending on size and materials. This long-term affordability makes hogwire one of the most cost-effective fencing options when you factor in durability and minimal upkeep.

Hogwire Fence Installation Process

Timeline: 2-4 Days (Typical)

Step 1: Consultation and Estimate

Our team visits your property to assess layout, discuss design preferences, measure the area, and evaluate terrain. We provide a detailed, transparent estimate with no surprises and show you samples of post materials and wire colors so you can visualize your finished fence.

Step 2: Design and Permitting

We finalize your design and materials, pull permits if required , and order custom materials. DH Fence Pros handles all permitting to ensure compliance with Seattle building codes. Most residential hogwire fences under 6ft don’t require permits in Seattle.

Step 3: Site Preparation

We mark property lines, remove existing fences if needed, and clear vegetation and obstacles. Our team ensures the site is safe and accessible for installation.

Step 4: Installation

Our licensed crew sets posts in concrete, installs and frames wire fence panels, installs gates and hardware, and conducts a final inspection with you. We make any final adjustments to ensure perfect alignment and operation.

Step 5: Cleanup and Final Payment

We remove all debris and materials, clean the worksite thoroughly, and final payment is due upon completion. We also provide detailed maintenance instructions to help you keep your fence looking beautiful for years to come.

Hogwire Fence Maintenance Tips for Seattle Weather

Seasonal Maintenance Schedule

Spring (March-May):

Rinse wire panels with garden hose
Remove debris caught in mesh
Inspect cedar frames for damage or rot

Summer (June-August):

Check gate hardware and hinges
Lubricate moving parts
Touch up frame finish if needed

Fall (September-November):

Trim vegetation away from fence
Clear leaves and debris from base

Winter (December-February):

Monitor drainage around posts
Inspect for damage from storms

Prevent Rust and Corrosion

For galvanized wire, rinse 1-2 times yearly to remove dirt and salt, avoid pressure washing, and touch up scratches with galvanizing spray. Inspect your fence after heavy storms or high winds to catch any damage early.

For powder-coated wire, wash with mild soap and water, touch up chips in coating promptly, and avoid abrasive cleaners. The powder-coated finish provides enhanced durability and a sleek appearance that many Seattle homeowners prefer.

Hogwire Fence Design and Customization Options

Post Material

Cedar posts and rails offer natural warmth and beauty that complements Pacific Northwest homes. They require sealing every 3-5 years and are the most popular choice in Seattle. Cedar’s natural oils provide resistance to rot and insects, making it an excellent choice for our wet climate.
For a hybrid option, cedar post-on-pipe combines the beauty of cedar with added durability. Learn more in our guide to post-on-pipe fencing.
Pressure-treated posts provide a cost-effective alternative to cedar, offering durability and rot resistance with less maintenance. However, they don’t have the natural aesthetic appeal of cedar wood.
Steel posts (postmaster posts) deliver an industrial modern aesthetic with powder-coated rust resistance. They’re extremely durable, require virtually no maintenance, and last 25-30 years or longer. These are perfect for contemporary homes.
Aluminum posts and rails are lightweight, rust-proof, and require zero maintenance. They offer a sleek, polished appearance and the longest lifespan, though at a higher cost.

Wire Color Options

Galvanized silver wire is our standard option. It provides a classic, neutral appearance and excellent rust resistance for Seattle’s wet climate, complementing both modern and traditional home designs.
Powder-coated black wire offers a sleek, modern aesthetic and enhanced durability. It’s a premium option that complements contemporary home designs but may require occasional touch-ups if the coating gets scratched.

Height and Design Options

Heights range from 3-4ft for garden borders up to 5ft for hogwire. The panels we source really only go up to 5ft height, and it gets complicated to make them any taller. For most residential applications, 4-5ft provides excellent pet containment and boundary definition.

Ready for Your Custom Hogwire Fence?

Hogwire fencing offers the perfect balance of modern style, functionality, and durability for Seattle homes. If you want a fence that maintains views, handles Seattle’s wet climate, and complements contemporary architecture, hogwire is an excellent choice.

At DH Fence Pros, we’ve installed hundreds of custom hogwire fences throughout Seattle for over 25 years. We understand how to design and build hogwire fences that work with Seattle’s terrain, climate, and architectural styles. Our transparent pricing and comprehensive warranty give you peace of mind.

Serving West Seattle, Capitol Hill, Queen Anne, Magnolia, Ballard, Greenlake, Bellevue, Mercer Island, and surrounding neighborhoods.

Want to explore other fencing options? Check out our cedar fencing and aluminum fencing services to see all your choices.

Contact DH Fence Pros today for a free consultation and transparent estimate. Our licensed, bonded, and insured contractors will assess your property and design a custom hogwire fence that perfectly fits your style and needs.

Call us at (206) 330-6709 or request your free estimate online

Licensed, bonded, and insured
36-month installation warranty
Transparent pricing, no surprises
Custom designs for every property

How long does a hogwire fence last in Seattle?

Cedar Fence Seattle Homes: Benefits, Cost & Installation

Daniel — Sat, 08 Nov 2025 12:46:11 +0000

Choosing the right fence for your Seattle home means finding a material that can handle the Pacific Northwest’s wet climate while adding natural beauty to your property. Cedar fencing delivers on both fronts.

Unlike lower-quality wood options that decay quickly or composite materials that can warp, Western Red Cedar offers natural resistance to rot, insects, and moisture damage. In fact, as a Seattle cedar fencing specialist, DH Fence Pros has installed beautiful, long-lasting cedar fences across the greater Seattle area for over 25 years.

Cedar fencing is naturally durable, weather-resistant, and ideal for Seattle’s rainy climate. Additionally, expect costs between $50 to $85 per linear foot, with most installations completed in 2 to 5 days. Whether you’re in West Seattle, Ballard, Queen Anne, Mercer Island, or neighboring areas, we’ll create a fence that fits your style and budget.

What is Cedar Fencing?

Cedar fencing is made from Western Red Cedar, a premium wood species native to the Pacific Northwest. Additionally, it’s valued for its natural beauty, durability, and resistance to the elements.

Key features that make cedar fencing stand out:

Natural resistance to rot, decay, and insects
Beautiful grain patterns and warm color tones
Available in privacy, horizontal, and decorative styles
Naturally aromatic with pleasant scent
Environmentally sustainable and renewable

Cedar fencing works well for:

Privacy fences (6 to 8 feet tall)
Decorative front yard fencing
Property line markers
Garden and backyard enclosures
Custom gates and entryways

What Are the Benefits of Cedar Fencing in Seattle?

1. Natural Durability for Seattle’s Climate

Seattle’s wet climate demands fencing materials that can withstand constant moisture. However, cedar naturally resists rot, decay, and insect damage thanks to its natural oils and tannins.

Why it matters in Seattle:

Handles constant rain, mist, and seasonal humidity without breaking down
Won’t rot or swell like lower-grade pine or fir in our wet climate
Naturally discourages carpenter ants and termites (common in wooded neighborhoods)
Stays stable even through damp winters and dry summer heat
Proven to perform well in coastal and Puget Sound moisture conditions

2. Beautiful Natural Aesthetics

Cedar fencing offers timeless beauty that complements any home style. Whether you have a traditional Craftsman in Queen Anne or a modern design in Mercer Island, cedar adds warmth and character to your property.

Aesthetic benefits:

Rich, warm color tones (reddish-brown to honey gold)
Beautiful natural grain patterns
Ages gracefully to silver-gray patina (if left unstained)
Can be stained or sealed to maintain original color
Natural beauty means you can leave it unstained for a rustic look or apply stain every 3 to 5 years

3. Customizable Design Options

Cedar fencing is incredibly versatile. As a result, you can create a fence that perfectly matches your vision and property needs.

Style options:

Privacy fences (board-on-board, solid panel)
Horizontal cedar fencing (modern, contemporary look)
Lattice-top designs (privacy with airflow)
Decorative caps and trim options
Custom heights (4, 6, or 8 feet)
Tailored designs that fit your landscape, style preferences, and privacy requirements

4. Long-Lasting Investment

Cedar fences are built to last 15 to 25 years or more with proper maintenance. Additionally, they add value to your property and enhance curb appeal.

Durability features:

Natural oils preserve wood and prevent decay
Strong, stable wood that resists warping
Performs reliably through Seattle’s wet winters and dry summers.
Can be repaired easily if damaged
36-month installation warranty on all cedar fence projects from DH Fence Pros

5. Eco-Friendly and Sustainable

Cedar is a renewable resource that’s sustainably harvested in the Pacific Northwest. Therefore, choosing cedar fencing supports local forestry and reduces environmental impact.

Environmental benefits:

Sustainably harvested from responsibly managed forests
Biodegradable at end of life
Requires less energy to produce than synthetic materials
Naturally grown without chemical treatments

How Does Cedar Compare to Other Fence Materials?

Unlike pressure-treated wood that requires chemical treatments and can warp over time, cedar naturally resists rot and insects without harsh chemicals. Similarly, while composite fencing is low-maintenance, it lacks the natural beauty and warmth of real wood. On the other hand, vinyl fencing is cheaper but can crack in extreme weather and doesn’t offer the same aesthetic appeal.

Meanwhile, metal fencing like aluminum is durable but doesn’t provide the privacy and natural look that cedar delivers. Ultimately, cedar gives you the best combination of beauty, durability, and natural weather resistance for Seattle’s climate.

How Much Does a Cedar Fence Cost in Seattle?

The cost of cedar fencing depends on style, height, grade of cedar, and project size. Therefore, here’s what to expect in the Seattle area.

Average cost per linear foot:

Standard privacy cedar fence: $50 to $60
Premium grade cedar fence: $60 to $80
Horizontal cedar fencing: 50 to $90
Custom designs with decorative elements: $80 to $100+

Factors that affect cost:

Fence height (6 feet vs. 8 feet)
Cedar grade (standard, premium, or clear grade)
Style complexity (privacy vs. horizontal vs. lattice-top)
Gate type (single vs. double, standard vs. custom)
Terrain and site preparation needs
Permits and inspections

For example, a 100-foot cedar privacy fence (6 ft height, board-on-board style) with one gate typically costs $6,000 to $8,000 installed.

To get a detailed estimate tailored to your property, contact DH Fence Pros for a consultation.

How Is a Cedar Fence Installed in Seattle?

Installing a cedar fence requires local expertise and attention to detail. Therefore, here’s what to expect when you work with DH Fence Pros.

Step 1: Consultation and Design

We visit your property to discuss your goals, style preferences, and budget. During this visit, we measure your yard, assess terrain, and check for utilities and property lines.

Step 2: Permit Application

Seattle only requires permits for fences over certain heights (depending on location and style). If a permit is needed, we take care of the paperwork and ensure everything meets local building codes.

Step 3: Site Preparation

Next, we mark fence lines, locate underground utilities, and prepare the ground for post installation.

Step 4: Post Installation

We use PostMaster galvanized steel posts or pressure-treated wood posts set in concrete for maximum stability. Throughout this process, we ensure proper spacing and alignment.

Step 5: Cedar Panel Installation

Cedar fence panels are installed with precision, and gates are hung with heavy-duty hinges and latches. Then, we check for level, smooth operation, and structural integrity.

Step 6: Final Inspection and Cleanup

We walk the property with you to ensure everything meets your expectations. Finally, we clean up all debris and haul away materials.

Timeline: Most residential cedar fence projects take 2 to 5 days for installation, depending on size and complexity. Ordering custom materials or specific cedar grades may add to the timeline.

Cedar Fence Maintenance Tips for Seattle

Cedar fences are low-maintenance, but a few simple steps can extend their lifespan and keep them looking beautiful.

Maintenance recommendations:

Clean annually: Rinse with water to remove dirt, moss, and debris
Stain or seal every 3 to 5 years: Protects wood and maintains color (optional but recommended)
Inspect for damage: Check for loose boards, broken posts, or gate issues
Trim vegetation: Keep plants and vines away from fence base to prevent moisture buildup

Staining options:

Clear sealant (natural look with protection)
Semi-transparent stain (enhances grain, adds color)
Solid stain (full color coverage, maximum protection)

What Makes DH Fence Pros Different for Cedar Fencing?

When you choose DH Fence Pros for your cedar fence project, you’re working with a team that understands Seattle’s unique climate challenges and has perfected the art of cedar fence installation over 25+ years.

Here’s what sets us apart:

Over two decades serving Seattle and the Pacific Northwest
5.0 Google rating with 70+ verified reviews
Licensed, bonded, and insured for your protection
Deep knowledge of Seattle codes, terrain, and weather patterns
36-month installation warranty on all work
Transparent pricing with detailed, upfront estimates
Custom designs tailored to your property and style
Responsibly sourced Western Red Cedar

We proudly serve West Seattle, Mercer Island, Magnolia, Queen Anne, Ballard, Capitol Hill, Greenlake, Bellevue, and surrounding neighborhoods throughout Seattle, WA.

Ready to Get Started?

Upgrade your Seattle home with a beautiful, durable cedar fence. Contact DH Fence Pros today for a consultation and transparent estimate.

How long does a cedar fence last in Seattle?

Aluminum Fence Seattle: Benefits, Cost & Installation Guide

Daniel — Wed, 05 Nov 2025 06:57:50 +0000

Choosing the right fence for your Seattle home means balancing durability, style, and low maintenance. Aluminum fencing checks all these boxes and more.

Unlike wood that rots in Seattle’s rainy climate or steel that rusts over time, aluminum offers a weather-resistant solution that looks great year after year. In fact, as a Seattle aluminum fencing company, DH Fence Pros provides long-lasting, low-maintenance fences built for the Pacific Northwest.

Quick Summary:

Aluminum fencing is durable, rust-proof, and ideal for Seattle’s wet weather. Expect costs between $50 to $100 per linear foot, with installation completed in 2 to 4 days.

What is Aluminum Fencing?

Aluminum fencing is a lightweight, durable metal fence made from aluminum alloy. Moreover, it’s designed to mimic the look of traditional wrought iron but without the weight, rust, or high maintenance.

Key features:

Powder-coated finish in black, bronze, or white
Available in ornamental, picket, or decorative styles
Rust-proof and weather-resistant
Lightweight but strong
Low maintenance

Common uses:

Front yard decorative fencing
Pool enclosures (meets safety codes)
Property line markers
Garden and patio borders
Commercial properties

What Are the Benefits of Aluminum Fencing in Seattle?

1. Weather-Resistant and Rust-Proof

Seattle’s wet climate is tough on fences. Rain, humidity, and moisture cause wood to rot and steel to rust. However, aluminum naturally resists corrosion.

Why it matters in Seattle:

No rust stains on driveways or patios
Stands up to rain, fog, and coastal salt air
Won’t warp, crack, or rot like wood
Maintains appearance in all weather condition.

Example: Homeowners in Ballard and West Seattle choose aluminum for waterfront properties because it handles moisture without deteriorating.

2. Low Maintenance

Aluminum fencing requires almost no upkeep. In contrast, wood fences that need staining every few years or steel fences that need rust treatment, aluminum stays looking new with minimal effort.

Maintenance requirements:

Rinse with water once or twice a year
No painting, staining, or sealing needed
Powder-coated finish lasts for decades
No termite or pest issues

Time savings: Wood fences require 8 to 12 hours of maintenance per year. Aluminum fences need less than 1 hour.

3. Elegant and Versatile Design

Whether you have traditional craftsman homes in Queen Anne or contemporary designs in Mercer Island, aluminum complements your property.

Style options:

Ornamental (decorative scrollwork and finials)
Picket (classic pointed or flat tops)
Pool-safe (meets safety codes)

4. Durable and Long-Lasting

Aluminum fences are built to last 20 to 30 years or more with proper installation. Additionally, they won’t bend, sag, or lose their shape over time.

Durability features:

Powder-coated finish resists chipping and fading
Strong aluminum alloy construction
Won’t corrode in wet conditions
Handles wind and weather without damage

5. Eco-Friendly and Recyclable

Aluminum is one of the most recyclable materials on the planet. Therefore, choosing aluminum fencing supports sustainability.

Environmental benefits:

100% recyclable at end of life
Uses less energy to produce than steel
No toxic chemicals or treatments needed
Long lifespan reduces waste

How Does Aluminum Compare to Other Materials?

Unlike wood fencing that requires staining every 2 to 3 years and can rot in Seattle’s wet climate, aluminum stays rust-free with almost no maintenance. Similarly, steel fences rust over time, while aluminum’s powder-coated finish lasts for decades. On the other hand, vinyl is cheaper but less durable and can crack in high winds. Meanwhile, wrought iron offers a similar look but costs more and requires rust treatment. Ultimately, aluminum gives you the best of all worlds: durability, low maintenance, and elegant design.

How Much Does an Aluminum Fence Cost in Seattle?

The cost of aluminum fencing depends on height, style, and project size. Therefore, here’s what to expect in the Seattle area.

Average cost per linear foot:

Standard ornamental: $50 to $70
Premium ornamental: $50 to $80
Pool-safe fencing: $50 to $90
Custom designs: $100+

Factors that affect cost:

Fence height (4 feet vs. 6 feet)
Style complexity (simple picket vs. ornamental)
Gate type (single vs. double, manual vs. automatic)
Terrain (flat vs. sloped yards)
Permits and inspections

For example, a 100-foot aluminum fence (4 feet tall, ornamental style) with one gate typically costs $5,000 to $6,000 installed.

To get a detailed estimate tailored to your property, contact DH Fence Pros for a consultation.

How Is an Aluminum Fence Installed in Seattle?

Installing an aluminum fence requires precision and local code knowledge. Therefore, here’s what to expect when you work with DH Fence Pros.

Step 1: Consultation and Design

We visit your property to discuss style, height, and placement. During this visit, we measure your yard and check for slopes, utilities, and property lines.

Step 2: Permit Application

Seattle requires permits for most fences. Fortunately, we handle all the paperwork and ensure compliance with local codes.

Step 3: Site Preparation

We mark fence lines, locate underground utilities, and prepare the ground for post installation.

Step 4: Post Installation

Aluminum fence posts are set in concrete for stability. Throughout this process, we ensure proper spacing and alignment.

Step 5: Panel and Gate Installation

Fence panels are attached to posts, and gates are installed with hinges and latches. Then, we check for level and smooth operation.

Step 6: Final Inspection

We walk the property with you to ensure everything meets your expectations. Finally, we clean up and haul away debris.

Most residential aluminum fence projects take 2 to 4 days for installation, depending on size and complexity. Ordering necessary materials may add to the timeline, depending on availability and customization.

Why Choose DH Fence Pros for Aluminum Fencing?

When you hire DH Fence Pros, you get:

25+ years serving Seattle and the Pacific Northwest
5.0 Google rating with 70+ verified reviews
Licensed, bonded, and insured for your protection
Local expertise in Seattle codes and terrain
36-month installation warranty on all work
Transparent pricing with detailed estimates
Custom designs for every property and budget

We proudly serve West Seattle, Mercer Island, Magnolia, Queen Anne, Ballard, and surrounding neighborhoods.

Ready to Get Started?

Upgrade your Seattle home with a beautiful, low-maintenance aluminum fence. Contact DH Fence Pros today for a consultation and transparent estimate.

FAQs About Aluminum Fencing in Seattle

How long does an aluminum fence last in Seattle?

Benefits of Hiring Licensed Fence Contractors in Seattle

Daniel — Fri, 31 Oct 2025 10:29:22 +0000

Hiring the right fence contractor can make or break your project. In Seattle, where weather, terrain, and local building codes create extra challenges, choosing a licensed fence contractor isn’t just smart. It’s essential.

A licensed professional brings expertise, accountability, and peace of mind. They understand Seattle’s unique conditions, from sloped yards in Queen Anne to wet soil in West Seattle, and know how to build fences that can handle the region’s rainy seasons.

At DH Fence Pros, we’ve proudly served Seattle homeowners for more than 25 years with licensed, insured, and professional fence installation. We help homeowners protect their property and boost curb appeal with confidence.

What Does “Licensed” Mean for Fence Contractors in Seattle?

A licensed fence contractor in Washington State has met specific requirements set by the Department of Labor and Industries (L&I). To earn and maintain their license, they must:

Carry liability insurance to protect homeowners from accidents
Maintain a contractor’s bond to guarantee work completion
Stay up to date with Seattle’s building codes and permit requirements

Why it matters: Unlicensed contractors may offer lower prices, but they often lack insurance, skip permits, and deliver poor work. If something goes wrong, you’re left paying the bill.

Top Benefits of Hiring Licensed Fence Contractors in Seattle

1. Expertise in Seattle’s Climate and Terrain

Seattle’s rainy weather and hilly neighborhoods require specialized experience. A licensed fence contractor understands:

How to prevent rot and warping in wet conditions
The best materials for the Pacific Northwest, such as cedar and galvanized steel
Proper drainage and post installation on sloped yards
Soil conditions in areas like Magnolia, Mercer Island, and Ballard

Example: A licensed contractor might recommend a post-on-pipe system for locations with poor soil drainage. This approach can extend your fence’s lifespan by 10 to 15 years.

2. Compliance with Local Building Codes

Seattle has clear fencing rules, including:

Fence height limits, usually six feet for backyards
Setback rules for property lines
Permit requirements for certain fence types

Licensed contractors handle these details for you. They apply for permits, follow Seattle’s building codes, and make sure your fence passes inspection.

Unlicensed contractors often skip these steps. This can lead to fines, removal notices, or problems when selling your home.

3. Insurance and Liability Protection

Accidents can happen. A licensed fence contractor carries:

General liability insurance to cover property damage
Workers’ compensation to cover injuries on your property

If an unlicensed contractor damages your property or a worker gets hurt, you could be responsible for the costs. Working with a licensed and insured professional protects you and gives you peace of mind.

4. Quality Workmanship and Warranty

Licensed contractors stand behind their work. At DH Fence Pros, we offer:

36-month installation warranty on all projects
High-quality materials such as Western Red Cedar and galvanized steel
Professional craftsmanship backed by 25+ years of experience

Why this matters: Unlicensed contractors rarely offer warranties. If your fence fails, you’re stuck paying for repairs.

5. Time and Cost Savings

Hiring an unlicensed contractor or doing the job yourself might look cheaper at first. It often costs more in the long run because of mistakes, permit issues, or low-quality materials.

Licensed contractors:

Get the job done correctly the first time
Use durable materials at fair prices
Finish projects on schedule

This saves time and money while giving you a fence that lasts.

Learn more about our fencing services and transparent pricing to see why Seattle homeowners trust DH Fence Pros for licensed and professional fence installation.

Questions to Ask Before Hiring

Are you licensed and insured in Washington State?
Can you provide references from recent projects?
Do you pull permits and handle inspections?
What warranty do you offer on installation?
What’s your timeline for completion?
Can you provide a detailed written estimate?

Why Choose DH Fence Pros?

When you hire DH Fence Pros, you get:

25+ years serving Seattle and the Pacific Northwest
5.0 Google rating with 70+ verified reviews
Licensed, bonded, and insured for your protection
Local expertise in Seattle’s climate, codes, and terrain
36-month installation warranty on all work
Transparent pricing with detailed estimates
Custom designs for every property and budget

We proudly serve West Seattle, Mercer Island, Magnolia, Queen Anne, and surrounding neighborhoods.

Ready to Get Started?

Don’t risk your investment with unlicensed contractors. Contact DH Fence Pros today for a consultation and transparent estimate.

FAQs About Hiring Licensed Fence Contractors in Seattle

Do I need a permit to install a fence in Seattle?

Is a Post-on-Pipe Fence Worth It for Seattle Homes?

Daniel — Sat, 25 Oct 2025 14:17:52 +0000

Cedar fencing is one of the most popular choices for Seattle homeowners, and for good reason. Its natural beauty, durability, and versatility make it ideal for Pacific Northwest properties. But there’s one major challenge: Seattle’s wet climate can cause traditional wood posts to deteriorate, settle, and fail more quickly than in drier regions.

At DH Fence Pros, we’ve been installing post-on-pipe cedar fences across Seattle for over 25 years. This proven system combines the beauty of cedar with the strength of galvanized steel, giving you a fence that lasts significantly longer when properly maintained.

What is Post-on-Pipe Fencing?

Post-on-pipe fencing uses galvanized steel pipes embedded in concrete as the foundation, with cedar posts mounted on top.

Here’s how it works:

Steel pipe is set in concrete below ground (away from soil moisture)
Cedar 4×4 posts are mounted above ground on the steel pipe
Fence panels attach to cedar posts for a natural wood look

This hybrid system provides the classic appearance of cedar while eliminating the main weakness of traditional fences: ground-line rot and deterioration.

Why It’s Ideal for Seattle’s Climate

In fact, Seattle receives an average of 38 inches of rain per year. Constant moisture means traditional cedar posts buried in the soil are prone to:

Moisture absorption and decay at the ground line
Rot and fungal damage
Insect activity (termites, carpenter ants)
Settling and leaning over time

Additionally, post-on-pipe technology prevents these issues by keeping wood entirely above ground, protecting it from soil contact and moisture.

Key Benefits of Post-on-Pipe Fencing

1. Extended Lifespan

Lasts 25 to 30+ years compared to 10 to15 years for traditional cedar posts.
Performance depends on quality installation, maintenance, and environmental conditions.

2. Reduces Rot & Insect Damage

Galvanized steel pipes don’t rot or attract pests.
Keeps wood dry and elevated, extending structural integrity.

3. Superior Stability on Sloped Terrain

Perfect for Seattle’s hilly neighborhoods like Magnolia, Queen Anne, and West Seattle.
Concrete-set steel foundations improve stability and alignment.

4. Low Maintenance

Minimal structural upkeep.
Simply stain or seal cedar every 3 to 5 years to maintain appearance.

5. Backed by Warranty

All post-on-pipe installations include our 36-month installation warranty.

6. Natural Cedar Beauty

Retains the warmth, texture, and aesthetic of Western Red Cedar.

Is Post-on-Pipe Right for Your Seattle Property?

Therefore, post-on-pipe fencing is often a good choice if you:

Live in a high-moisture area
Want a fence designed for long-term durability
Have sloped or challenging terrain
Prefer lower-maintenance solutions
Value long-term investment over short-term savings

Learn more about our fencing services or contact us to schedule a free consultation.

Why Choose DH Fence Pros for Post-on-Pipe Installation

25+ years serving Seattle and the Pacific Northwest
5.0 Google rating with 70+ verified reviews
Licensed, bonded, and insured for your protection
Local expertise in Seattle’s climate, codes, and terrain
Custom designs for every property and budget
Transparent pricing with detailed estimates
36-month installation warranty on all work

We proudly serve West Seattle, Mercer Island, Magnolia, Queen Anne, and surrounding neighborhoods, offering fencing solutions designed for Seattle’s rainy climate.

Ready to invest in a fence built to last? Contact us today and let’s design something beautiful together.